Injection molding machines are mainly divided into two categories: vertical injection molding machines and horizontal injection molding machines. Today, the focus of Jin Plastic Machinery’s sharing is the vertical injection molding machine. We will share.

Nowadays, the horizontal injection molding machine industry is very hot, no matter whether it is a new machine or a second-hand horizontal injection molding machine seller, there is no machine. Therefore, many buyers do not care about the quality of the h.

The screw of the injection molding machine is the key part of the plasticized part, and it is in direct contact with the plastic. The effective length of the plastic through the screw groove has to undergo a three-state (glass state, viscoelastic state, v.

The wide application of plastics in automobiles, home appliances, packaging, medicine and other fields has driven the rapid development of the injection molding industry. At present, China's injection machine industry is gradually shifting from its quant.

In daily life, many things that can be seen everywhere are made by molds and there are many ways to produce molds, which are realized by injection molding machines, so injection molding machines are widely used. According to the arrangement of the injecti.

The interface between the injection molding machine and the manipulator is a handshake protocol that coordinates the sequential actions of the injection molding machine and the manipulator. The interface defines the mechanical installation method and the.

The manipulator of the injection molding machine can complete its work steps in an orderly manner during injection, and all its actions are completed under the command of the control system. Under the command and operation of the injection molding machine.

The manipulators often used in injection molding machines can generally be divided into the following three types according to their functions:.

What is telling the injection molding machine?
High-speed injection molding machines are all electric motors, ordinary injection molding machines are hydraulic injection molding machines, and hydraulic injection molding machines are relatively slow. High.

Although hydraulic pressure is still the main type of injection molding machine, the development trend of electric injection molding machine is also hot. The emergence of electric injection molding machine has brought cost-effective solutions for plastic.

In recent years, the injection molding machine market has developed rapidly, and various injection molding machine models, tonnages, and functions are constantly updated and enhanced. However, some corresponding machines with poor performance are also mix.

Regarding the "Injection Molding Machine Operation Process" that many people who have just entered the injection molding industry are more concerned about, here is a brief introduction to Lisong Machinery!.

The vertical injection molding machine must be operated correctly to extend the working time of the injection molding machine and increase the profit of the enterprise!.

Horizontal injection molding machine is a type commonly used in plastic injection molding. In order to extend the life of the injection molding machine, it must be operated correctly!.

In recent years, customers buying second-hand injection molding machines in the market are more common. The circulation of second-hand injection molding machines in the market not only increases the utilization rate of injection molding machines, but also.

For companies engaged in injection molding machine processing, although technological innovation is necessary, companies should also pay attention to the quotation of injection molding processing. In order to ensure the benefits, it is very important to c.

The 50 ton automatic injection molding machine is a mechanical equipment, usually composed of injection system, mold clamping system, hydraulic transmission system, electrical control system, lubrication system, heating and cooling system, safety monitori.

The injection molding machine is a universal device. The tool determines what is made. Therefore, almost any injection molding machine with suitable tools can be used to make cups. The size of the machine needs to be adjusted so that the injection volume.

After the blow molding machine sprays out the liquid plastic, the wind blown by the machine is used to blow the plastic body to a certain shape of the cavity to make a product. The plastic is melted and quantitatively extruded in the screw extruder, and t.

The cause of deformation and warpage of plastic products refers to the deviation of the shape of the injection product from the shape of the mold cavity. It is one of the common defects in the production of plastic products by the injection molding machin.

The small injection molding machine has high raw material utilization, less waste and low energy consumption. Easy to use, high degree of automation, multiple splines can be injected continuously after one filling of raw materials. The mold clamping syste.

The silicone injection molding machine adopts a mobile three-cylinder balanced vertical injection structure, which has more stable injection force and lower equipment height; a free-hanging injection device realizes the automatic alignment of the plunger.