Welcome Lisong Plastic Machinery Co., Ltd!

News

Brief introduction of JZ-20 type micro injection molding machine

writer:LI SONG Share

The micro injection molding machine has high raw material utilization rate, less waste and low energy consumption. Easy to use, high degree of automation, multiple splines can be injected continuously after one filling of raw materials. The mold clamping system is adopted, which is convenient for operation and strong mold clamping force. The special design of mold and equipment interface makes mold replacement and installation convenient and reliable. It is small in size and light in weight, and can be placed on a laboratory bench to work.

 
Features of JZ-20 experimental micro injection molding machine:​​​​​​
1. The injection machine is a plunger structure.​​​​​​
2. The maximum injection volume at one time is 30g. High usage rate, less waste and low energy consumption. (There are 15g and 20g models)
3. It can inject various national standard and American standard spline molds, and the 30-gram model can process 100X100X(1-3)mm sheet splines and 150mm stretch splines.
4. With the extruder, almost all thermoplastic polymer material splines can be made, such as: polyimide, PEEK, polyphenylene sulfide, PLA, PA, polycarbonate, etc. or add magnetic powder, ceramic powder, graphene, poly The level of tetrafluoroethylene powder, metal powder, short glass fiber powder can reach nano-level)
5. The special design of mold and equipment interface makes mold replacement and installation convenient and reliable.​​​​
6. The sampling method is automatic demoulding.​​​​​​
7. The optional control system of the micro injection molding machine is a PLC touch screen, which can store multiple recipes and processing technology parameters.
8. Easy to use, automatic injection machine, one filling of raw materials can continuously inject multiple splines.​​​​​
9. Using automatic operating system, easy to operate, strong mold clamping force​​​​​​
10. Temperature control zone: 2 zones, instrument temperature control, the highest operating temperature is 450℃.
11.The syringe barrel can be made according to the experimental raw materials Φ12-18mm​​​​​​
12. It is small in size and light in weight, and can be used on a laboratory bench or a fume hood.​​​​​​
13. It can be used in conjunction with the micro extruder produced by our factory. The material can directly enter the injection sleeve of the injection machine, and it is directly convenient for injection molding of splines and various injection products. (It is convenient to use and can avoid secondary processing)

Related News
Related Product
LI SONG Injection Molding Machine-TECHNICAL & SPECIALTY

2020 Star Of Injection Molding Machine Manufacturer!

Please write it
kevin@lisonginc.com
TOP