Welcome Lisong industrial technology Co., ltd !

News

Mixed materials injection molding machine manufacturingmethod

TIME:2020-12-31 Share

The injection molding machine is the main molding equipment that uses plastic molding molds to make thermoplastic or thermoset plastics into various shapes of plastic products. It can heat the plastic, apply high pressure to the molten plastic, and inject it to fill the mold cavity.

The traditional injection molding machine is loaded by manual quantitative feeding, and different raw materials need to be quantitatively transported to the injection molding machine according to a certain ratio. Manual weighing and mixing are relatively random, which affects the quality of injection molds, low efficiency, and wastes labor costs. For this reason, we propose an injection molding machine with mixed injection materials.

Technical features of injection molding machine with mixed injection materials:

injection molding machine
1. An injection molding machine with mixed injection raw materials, comprising a mixing barrel (1), characterized in that the bottom of the mixing barrel (1) is connected to the injection molding machine body (2), and the top of the mixing barrel (1) is equipped with a motor (3), the output end of the motor (3) extends to the mixing barrel (1) with a stirring device (4) installed inside the mixing barrel (1) on the left and right sides of the outer wall are equipped with feeding devices (5), feeding devices (5) ) An electric telescopic rod (6) is installed in the middle of the bottom. The sides of the feeding device (5) near the front and rear ends are slidingly connected with arc-shaped pillars (7), and the inner wall of the arc-shaped pillar (7) is connected to the mixing barrel (1) On the outer walls of the front and rear ends, the bottom of the arc-shaped pillar (7) and the bottom of the electric telescopic rod (6) are both connected to the top of the injection molding machine body (2).

2. An injection molding machine with mixed injection raw materials according to claim 1, characterized in that: the bottom of the feeding device (5) is provided with an annular plate (51), and the inside of the annular plate (51) abuts against the mixed material A curved panel (52) is installed on the outer wall of the cylinder (1) and the top of the outer ring plate (51). The curved panel (52) is a transparent plastic curved panel. The outer wall of the curved panel (52) is provided with scales. Inclined panels (53) are installed on the tops of both sides, and the front and rear ends of the curved panel (52) are respectively connected with two sets of inclined panels (53).

3. An injection molding machine with mixed injection molding raw materials according to claim 1, characterized in that: the stirring device (4) includes a middle rotating rod (41), and a set of rotating rods (41) are equidistantly installed on the outer wall of the rotating rod (41). The blade (42) and a set of rotating brushes (43). A set of rotating brushes (43) includes two sets of brush handles. The two sets of brush handles are respectively arranged on the left and right sides of the rotating rod (41). The brush handles are away from the rotating rod (41). ) Is equipped with stainless steel bristles at one end.

4. An injection molding machine with mixed injection raw materials according to claim 1 or 2, characterized in that: the side of the inclined plate (53) away from the curved plate (52) is equipped with a slider (54), and the arc The left and right sides of the shaped support (7) are equipped with sliding grooves matched with the sliding block (54).

5. An injection molding machine with mixed injection raw materials according to claim 1, characterized in that: a cover plate (101) is installed in the middle of the top of the mixing barrel (1), and the motor (3) is installed on the cover plate (101). In the middle of the top, the tops of the outer walls of the left and right sides of the mixing barrel (1) are provided with arc-shaped notches (102) matched with the feeding device (5).

6. An injection molding machine with mixed injection raw materials according to claim 2 or 5, characterized in that: the top of the outer wall of the curved panel (52) is equipped with a fixed block (8), and the fixed block (8) is provided with A square slot, a vertical rod (9) is arranged inside the square groove, a cross rod (10) is fixedly installed between the tops of the two sets of vertical rods (9), and the left and right sides of the bottom of the cross rod (10) are provided with support rods. The bottom is connected to the cover plate (101).

The LISONG hybrid injection molding machine uses a novel design, simple operation, and eliminates a lot of manpower. By controlling the electric telescopic rod, you can control the proportion of the injected injection material, which improves the quality of the injection mold; by setting a transparent and graduated curve The panel allows personnel to observe the component of the injection material inside the feeding device, facilitate timely replenishment, and accurately control the component of the injection material.

Related News
Related Product
LI SONG Injection Molding Machine-TECHNICAL & SPECIALTY

2020 Star Of Injection Molding Machine Manufacturer!

Please write it
kevin@lisonginc.com
TOP