Welcome Lisong industrial technology Co., ltd !


What are the advantage and characteristics of the vertical injection molding machine?

TIME:2020-11-18 Share

What are the advantage and characteristics of the vertical injection molding machine? The vertical injection molding machine is controlled by microcomputer, and the power system is driven by oil pressure. The plastic is heated by the electric heating ring in the material pipe and sheared by the screw rotation of the material pipe. The plastic is injected into the mold cavity through the pre molding melting injection. After cooling, opening the mold and ejecting, the product is obtained. This machine can be used for manual and semi-automatic production.

What is the characteristics of vertical injection molding machine?
1. Vertical columnless lock mold, horizontal injection molding, mold three open, more convenient and safe operation.
2. High injection pressure, torque type hydraulic motor control, large screw torque, high pre plastic quantity, system pressure controlled by proportional valve.
3. Multi stage pressure output, sensitive pressure response, precise and accurate.
4. It can be installed with single or double slide plate and turntable system to improve production efficiency.
5. It is suitable for the production of large amount of ejaculatory glue.

What is the advantage of vertical injection molding machine?

1. In small batch trial production, the die structure is simple, the cost is low, and it is easy to unload.
2. It is easy to realize insert molding. Because the mold surface is upward, it is easy to insert and position the insert. If the lower template is fixed and the upper template is movable, and the belt conveyor is combined with the manipulator, the automatic insert molding can be easily realized.
3. The weight of the die is supported by the horizontal template, and the opening and closing action will not occur, which is similar to that of the horizontal machine due to the gravity of the mold, which makes the template unable to open and close. It is beneficial to maintain the accuracy of the machine and the mold.
4. The cavity of each plastic part can be taken out by a simple manipulator, which is conducive to precision molding.
5. Generally, the mold locking device is open and open, and it is easy to configure various kinds of automatic devices, which is suitable for the automatic forming of complex and exquisite products.
6. The belt drawing and conveying device is easy to be installed in the middle of the mould in series, so as to realize automatic forming production.
7. It is easy to ensure the consistency of resin fluidity and mold temperature distribution in the mold.
8. Equipped with rotary table, mobile table and inclined table, it is easy to realize insert molding and in mold combination molding.
9. It has been tested by many earthquakes. Because of its low center of gravity, the vertical machine has better seismic performance than the horizontal machine.

The above contents are introduced by Dao An injection molding machine manufacturers. we also provide the PET Special Injection Machine,PVC Special Injection Machine,Speed Injection Machine,plastic Injection Machine. If you are interested in more detailed  information of injection molding machine,please leave message to us!

Related News
Related Product
LI SONG Injection Molding Machine-TECHNICAL & SPECIALTY

2020 Star Of Injection Molding Machine Manufacturer!

Please write it