Welcome Lisong industrial technology Co., ltd !

News

How to use stationery special injection molding machine correctly?

TIME:2021-04-23 Share

As we all know, the use of injection molding machines for stationery not only has a major impact on the production plan, but also has a major impact on the service life of the machine.

In the following content, we will introduce the correct use of stationery injection molding machine:

1. Check whether the safety protection devices of each part of the stationery injection molding machine are intact.
2. Check and test whether the emergency stop and various safety protection alarms can work correctly and normally. The safety door should slide flexibly, and the stop position during opening and closing should be in correct contact with the limit switch, etc.
3. When maintaining the injection molding machine, check the parts according to the drawings. Even if there is no special instruction, it must be checked at the time of storage.
4. Clean up the surrounding environment of the equipment for producing stationery special injection molding machines, and do not store any items unrelated to production.
5. Check whether there is any looseness in the wiring and grounding wire of each circuit of the equipment.
6. Tools used in production should be clean, hygienic, and neatly placed.

The above are the six points of attention when using a stationery injection molding machine, but what is more worthy of attention is that the daily maintenance of the injection molding machine must be carried out carefully and carefully to ensure that the mold is kept in the best condition at all times.

Related News
Related Product
LI SONG Injection Molding Machine-TECHNICAL & SPECIALTY

2020 Star Of Injection Molding Machine Manufacturer!

Please write it
kevin@lisonginc.com
TOP