What is a two-plate injection molding machine?

Many customers are not aware of the two-platen horizontal injection molding machine that is newly appeared in the injection molding machine market. Here, the Lisong mechanical technicians will popularize some knowledge about the two-platen horizontal injection molding machine for customers!

Structural features of two-platen horizontal injection molding machine:
1. The two-plate mold is a mold with gate, runner, gate and cavity. They are all on the same side of the mold. According to the parting line, they are divided into moving half and fixed half.
2. The two-plate mold is the simplest injection mold structure and has many advantages.

Common parameters of two-plate horizontal injection molding machine:
1. Reset pin: Ensure that the thimble is pulled back before closing the mold to protect the injection mold from damage. It is usually made of SKD61.
2. Guide pin/guide bushing: GP and GB are designed for precise guidance, so GP and GB must be precise.
3. Positioning ring: Position the filling hole between the nozzle and the gate, usually made of S55C
4. Riser: Let the melt flow into the cavity.
5. Ejector guide pin: During ejection, EGP is used as a guide to ensure correct ejection.
6. Support column: Support the B side plate to avoid deformation under high injection pressure.

For more information about the two-platen horizontal injection molding machine, please leave us a message!