Welcome Lisong industrial technology Co., ltd !


What is the difference between a horizontal injection molding machine and a vertical?

TIME:2021-01-12 Share

LISONG Machinery introduces you to 15 characteristics of horizontal injection molding machine and vertical injection molding machine:
1. In the vertical injection molding machine, the injection device and the clamping device are on the same vertical centerline, and the mold is opened and closed in the up and down direction. Its floor space is only about half of that of a horizontal injection molding machine, so it is about twice as productive as the floor space.
2. Easy to realize insert molding. Because the surface of the mold faces upwards, it is easy to insert and position the insert. If the lower template is fixed and the upper template is movable, and the belt conveyor and the robot are combined, fully automatic insert molding can be easily realized.
3. The weight of the mold is supported by the horizontal template to open and close up and down, and the phenomenon that the template cannot be opened and closed due to the gravity of the mold like a horizontal machine will not occur. It is conducive to maintaining the precision of machinery and molds.
4. Each plastic part cavity can be taken out by a simple manipulator, which is conducive to precision molding.
5. Generally, the surrounding mold clamping device is open, and it is easy to configure various automatic devices, which is suitable for automatic molding of complex and delicate products.
6. The belt-drawing conveying device is easy to realize the installation through the middle of the mold, which is convenient for realizing automatic molding production.
7. It is easy to ensure the resin fluidity in the mold and the consistency of mold temperature distribution.
8. Equipped with rotating table, moving table and inclined table, it is easy to realize insert molding and in-mold combination molding.
9. In small batch trial production, the mold structure is simple, low cost, and easy to unload.
10. Having withstood the test of many earthquakes, the vertical machine has better seismic resistance than the horizontal machine due to its low center of gravity.
Features of horizontal injection molding machine
11. Because of the low body of the large injection molding machine, there is no height restriction on the installed workshop.
12. When the product can fall automatically, automatic molding can be realized without using a manipulator.
13. Due to the low body, it is convenient to supply materials and easy to maintain.
14. The mold must be installed by crane.
15. When multiple units are arranged side by side, the molded products can be easily collected and packaged by the conveyor belt.
  The characteristics of the angle injection molding machine are that the axis of the injection screw and the movement axis of the mold clamping mechanism are arranged perpendicular to each other, and its advantages and disadvantages are between the vertical and horizontal.

Related News
Related Product
LI SONG Injection Molding Machine-TECHNICAL & SPECIALTY

2020 Star Of Injection Molding Machine Manufacturer!

Please write it