Welcome Lisong industrial technology Co., ltd !

News

What to pay attention to when using high-speed thin-wall injection molding machine?

TIME:2021-04-20 Share

The high-speed thin-wall injection molding machine can complete the injection molding operation, but the following points should be paid attention to when the staff uses it to ensure the safety of the production process and personal safety.

If the temperature of the high-speed thin-wall injection molding machine rises, the damage to us will still be great in this case. For example, it is likely to deform the machine. If the thermal expansion coefficients of hydraulic components are different, the gaps will also change accordingly, which may cause system failures, and the transmission accuracy of the hydraulic system itself will naturally be affected, and the working quality of the machine will decrease.

high-speed thin-wall injection molding machine
An increase in temperature will cause the viscosity of the oil to decrease. If this situation exists, it will reduce all the functions of the high-speed thin-wall injection molding machine system. Due to the decrease in viscosity, the wear of parts in the lubrication area will also greatly increase, resulting in the problem of increased wear. Excessive temperature will damage part of the rubber structure. If the temperature is too high, the aging speed of the rubber will be accelerated, thereby reducing its sealing function, the service life will also be reduced, and leakage accidents will occur. If the temperature is too high, it may also be caused by a clogged pipe. For example, there will be clogged filter screens and clogged cooling towers.

There are many problems caused by high temperature. Therefore, staff must avoid such problems when dealing with such problems, and deal with them promptly when an attack occurs. When operating a high-speed thin-wall injection molding machine, injection molding machine manufacturers also need to be careful not to remove various safety devices. If there is any malfunction or accident in the safety equipment, the machine needs to be shut down. Before restarting the high-speed thin-wall injection molding machine, the manufacturer must ensure that the fault has been eliminated.

Related News
Related Product
LI SONG Injection Molding Machine-TECHNICAL & SPECIALTY

2020 Star Of Injection Molding Machine Manufacturer!

Please write it
kevin@lisonginc.com
TOP